News RSS

Engineering Mode is another way to extract ECU / TCU / VIN / and other useful information from the vehicle.   1. Turn key to the "Run" position, Engine Off 2. Grab the Injected Tuning Device and hold the "N" and "Up Arrow" buttons at the same time. 3. While still holding both buttons, Plug the device into the DLC port. DO NOT LET GO OF THE BUTTONS 4. Wait about 10-11 secs, the device will then enter "Engineering Mode".  5. At this time you can let go of the buttons. 6. The Device screen should now read "Engineering Menu" 7....

Read more

The following instructions are for uploading your vehicles information from a "Blank" device so you can receive your tuning files.    Before you get started download and install the Tuner Update Application software onto your PC. If you have not done this, please follow this LINK 1st, then return to finish.    1. turn key to the "run" position 2. plug the device into the OBD port3. Ok.. during this time its going to check for DTC codes CLEAR THEM by pressing "N".....DO NOT VIEW THEM 4. Now the device will ask you to go into programming mode... select "Y" 5....

Read more

This is Injected's end-user Tuner Updater Application for updating firmware, Tune file updates, and future development. You must have this to perform a "blank" device read and/or updating Tune files sent to your device.    Here is the link to the software: Download This download is compatible with Windows NT, Windows 2000, Windows 2003 server, Windows XP, Vista32-bit and 64-bit, Windows 7 32-bit and 64-bit. You may receive a message stating that the publisher cannot be verified. If so simply click run and follow the on screen prompts.   Once you have downloaded and installed the Application. Plug your Injected Tuning...

Read more